Made in China Cl140 Cl150 Cl180 Silent Chain Belt

• Customization: Available
• Type: NN250
• Material: Metal
• Model NO.: 100 120 125 140 150 180 200 250 300
• Inside Material: Metal
• Feature: Heat-Resistant
• Tensile Strength: Strong
• Transport Package: Fumigation Free Wooden Box
• Specification: 10*10*10
• Trademark: RongDa
• Origin: Chinese Mainland

Product Description

Improved sliding characteristics
Some glass bases have minimal contact with the inverted tooth chain. This disrupts the sliding quality when shifting the products on and off the chain. The same applies to angled fluting in the glass base. Has developed a solution for these challenges: toothed plate edges are rounded off in an extra work step.
This keeps the contact area to a minimum while reducing sliding forces. In addition, the risk of toppling during lateral shifting is minimized, which is especially important for tall, top-heavy products. As shown in the figure, rounded edges can cut the forces required for lateral shifting (both static and sliding friction forces) by roughly one half.
*Reduces the risk of base cracks
*Reduces toppling in topple-prone bottles
*Reduces the sliding resistance of glassware
*Improves sliding properties

The right layout
Inverted tooth chains have a lamellar design, which always results in a gap between the individual link plates. The additional integration of spacers and/or the use of extended pitches increase this gap, which promotes cooling. Here are just a few examples:
Layout 1
Standard layout with a surface air permeability of 22%.
This inverted tooth chain is the basis for comparison with other versions, i.e. 100%, Type RS-200-CL.
Layout 2
Extended pitch.
Air permeability = 31%,
type TT-200-CL.
Layout 3
Extremely open
extended pitch.
Air permeability = 53%. type TS-200-CL

Toothed chain belt is also called silent chain belt. Through special heat treatment process, it solves the problem that the heat treatment is not up to standard, which is common in China. The chain piece is forged by special steel strip with heat treatment thickness of 0.2mm. The outer layer is hard and the inner part is soft, which solves the problems of fragmentation and non abrasion, and prolongs the service life (it can be used for 3-5 years under normal conditions).
transport of even the smallest bottles. Consistent chain height allows glassware to be smoothly transferred on and off the conveyor, reducing breakage caused by improper product feeding and tipping. For the ultimate in smooth transport, the chain surface can be ground.
Economy. Because it lasts for years, improves product handling, and requires little or no maintenance,  chain provides a cost-effective means for conveying glassware in high-speed production lines. The right chain can help reduce breakage and machine downtime
Conveyor chain
CENTER GUIDE GHAIN Link thickness:1.5mm for standard and La-profile:3mm for 25.4mm

ALL LINK &LINK SPACER ASSMBLY				SINGLEPIN	TWO PIN
ASSEMBLY NUMBER	NOMINAL WIDTH(mm)	WL (MAX)mm	SPROCKET WIDTH(mm)	WH (MAX)mm	WH (MAX)mm
CL100	100	95	100	100	94
CL125	125	122	125	126	125
CL150	150	145	150	151	150
CL180	180	175	180	182	181
CL200	200	196	200	203	202
CL220	220	216	220	202	222
CL250	250	248	250	254	253
CL300	300	296	300	305	303

MULTI GUID GHAIN

ALL LINK&LINK-SPACER ASSMBLY					SINGLE PIN	TWO PIN
ASSEMBLY NUMBER	NOMINAL WIDTH(mm)	WL (MIN)mm	WBG (MIN)mm	WBG (MIN)mm	WH (MAX)mm	WH (MAX)mm
ML100	100	98	68.5	67	103	103
ML125	125	123	97	95	128	128
ML150	150	150	97.3	96	154	154
ML200	200	196	145.5	144	202	202
ML250	250	248	196	195	252	253
ML300	300	299	245.5	244	304	303

CL100	100	91.0	100.0	95.0	5.2	94.0	5.6
CL120	120	116.0	120.0	120.0	6.6	119.0	7.1
CL125	125	122.0	125.0	126.0	7.0	125.0	7.5
CL140	140	135.0	140.0	139.0	7.7	138.0	8.2
CL150	150	147.0	150.0	151.0	8.5	150.0	9.1
CL180	180	175.0	180.0	179.0	10.1	178.0	10.8
CL200	200	199.0	200.0	203.0	11.4	202.0	12.2
CL250	250	250.0	250.0	254.0	14.5	253.0	15.5
CL300	300	300.0	300.0	304.0	17.2	303.0	18.4

 

CS100	100	91.0	100.0	95.0	3.5	94.0	3.7
CS120	120	116.0	120.0	120.0	4.5	119.0	4.8
CS125	125	122.0	125.0	126.0	4.7	125.0	5.0
CS140	140	135.0	140.0	139.0	5.2	138.0	5.5
CS150	150	147.0	150.0	151.0	5.6	150.0	5.9
CS180	180	175.0	180.0	179.0	6.7	178.0	7.1
CS200	200	199.0	200.0	203.0	7.6	202.0	8.1
CS250	250	250.0	250.0	254.0	9.6	253.0	10.2
CS300	300	300.0	300.0	304.0	11.4	303.0	12.1